To View Local Inventory Click on "Show In Stock Only" in Dropdown Above before using Filters Below
Kyocera & Korloy Cutoff (or Partoff) Inserts and Toolholders.
Here are Parameters:
TKR-1.6PCR9025 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR-1.6PCR9025 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL-1.6CR9025 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL-1.6CR9025 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
Kyocera PKM 30L025PM6D GW15 Grade Uncoated Carbide, 0.1180" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 30L025PM6D GW15 Grade Uncoated Carbide, 0.1180" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 30L025PM6D PR1625 Grade PVD Carbide, 0.1180" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 30L025PM6D PR1625 Grade PVD Carbide, 0.1180" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 30L025PM6D PR1535 Grade PVD Carbide, 0.1180" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 30L025PM6D PR1535 Grade PVD Carbide, 0.1180" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 30N025PM PR1535 Grade PVD Carbide, 0.1180" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 30N025PM PR1535 Grade PVD Carbide, 0.1180" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 30N025PM GW15 Grade Uncoated Carbide, 0.1180" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 30N025PM GW15 Grade Uncoated Carbide, 0.1180" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 30R025PM6D PR1535 Grade PVD Carbide, 0.1180" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 30R025PM6D PR1535 Grade PVD Carbide, 0.1180" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 30N025PM PR1625 Grade PVD Carbide, 0.1180" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 30N025PM PR1625 Grade PVD Carbide, 0.1180" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 30R025PM6D GW15 Grade Uncoated Carbide, 0.1180" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 30R025PM6D GW15 Grade Uncoated Carbide, 0.1180" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 30R025PM6D PR1625 Grade PVD Carbide, 0.1180" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 30R025PM6D PR1625 Grade PVD Carbide, 0.1180" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 20L020PM6D PR1535 Grade PVD Carbide, 0.0790" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 20L020PM6D PR1535 Grade PVD Carbide, 0.0790" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 20L020PM6D GW15 Grade Uncoated Carbide, 0.0790" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 20L020PM6D GW15 Grade Uncoated Carbide, 0.0790" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 20L020PM6D PR1625 Grade PVD Carbide, 0.0790" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 20L020PM6D PR1625 Grade PVD Carbide, 0.0790" Cutting Width, Left-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 20N020PM GW15 Grade Uncoated Carbide, 0.0790" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 20N020PM GW15 Grade Uncoated Carbide, 0.0790" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 20N020PM PR1535 Grade PVD Carbide, 0.0790" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 20N020PM PR1535 Grade PVD Carbide, 0.0790" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 20N020PM PR1625 Grade PVD Carbide, 0.0790" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 20N020PM PR1625 Grade PVD Carbide, 0.0790" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 20R020PM6D GW15 Grade Uncoated Carbide, 0.0790" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 20R020PM6D GW15 Grade Uncoated Carbide, 0.0790" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals and (S) Heat-Resistant Alloy
Kyocera PKM 20R020PM6D PR1535 Grade PVD Carbide, 0.0790" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 20R020PM6D PR1535 Grade PVD Carbide, 0.0790" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 20R020PM6D PR1625 Grade PVD Carbide, 0.0790" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
Kyocera PKM 20R020PM6D PR1625 Grade PVD Carbide, 0.0790" Cutting Width, Right-Hand Cut-Off Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel and (M) Stainless Steel Material Applications
TKL4TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL4TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR1.6-PKW10 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR1.6-PKW10 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL3TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL3TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR-2-PTN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR-2-PTN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR-1.6TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR-1.6TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL-2TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL-2TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKN1.6-PTN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKN1.6-PTN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR1.6-PTN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR1.6-PTN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL-2.4TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKL-2.4TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR-2.4TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKR-2.4TN90 - Package Quantity: 10. Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12L050-NBPR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12L050-NBPR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12L050-NB-20DRPR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12L050-NB-20DRPR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12L070-NB-20-DRPR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12L070-NB-20-DRPR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKFT-12LA55005PR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKFT-12LA55005PR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKFT-12RB55005PR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKFT-12RB55005PR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKFT-12LB6000PR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKFT-12LB6000PR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKFT-12LB55005PR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKFT-12LB55005PR1025 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R100-SPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R100-SPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-16R150-NB-20DRPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-16R150-NB-20DRPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R050-NB-20DRPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R050-NB-20DRPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R100-NBPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R100-NBPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R050-S-16DRPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R050-S-16DRPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R150-NBPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R150-NBPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R070-NB-20DRPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)
TKF-12R070-NB-20DRPR930 - Package Quantity: 10. Cut Off Insert, Carbide Cut Off Insert, KTKF, Swiss Tooling. If No Stock at Hill then Factory Stock (NC)