1/2" Diameter Low Carbon Steel Long (6XD-8XD): 2" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in Low Carbon Steels like 1018, 12L14 or A36:
1/2" Diameter x 2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
Axial DOC | 2" and Below |
Radial DOC | .035" |
SFM | 600 |
RPM | 4,584 |
CLPT | .002" |
IPM | 45.84 |
Metal Removal Rate | 4.01 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
Subscribe to our newsletter and always be the first to hear about what is happening.