1/2" Diameter PH Series Stainless Regular (3XD-5XD): 1-5/8" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in 17-4PH and 15-5 PH (38-42 HRc) and Titanium (6AL4V):
1/2" Diameter x 1-1/2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
1/2" Diameter x 1-5/8" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
| Axial DOC |
1-5/8" and Below |
| Radial DOC |
.035" |
| SFM |
300 |
| RPM |
2,292 |
| CLPT |
.004" |
| IPM |
45.84 |
| Metal Removal Rate |
2.60 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
