Optimized Tool Path 1/4" Low Carbon Steel Long

1/4" Diameter Low Carbon Steel Long (6XD-8XD): 1-1/2" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in Low Carbon Steels like 1018, 12L14 or A36:

1/4" Diameter x 1-1/4" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill

1/4" Diameter x 1-1/2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill

Axial DOC 1-1/2" and Below
Radial DOC .015"
SFM 600
RPM 9,168
CLPT .0015"
IPM 68.7
Metal Removal Rate 1.54

 *Do not use these Speeds/Feeds if you are not running an Optimized Tool Path