1/8" Diameter PH Stainless Regular (3XD-5XD): 1/2" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in 17-4PH and 15-5 PH (38-42 HRc) and Titanium (6AL4V):
1/8" Diameter x 1/2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
| Axial DOC |
1/2" and Below |
| Radial DOC |
.010" |
| SFM |
300 |
| RPM |
9,168 |
| CLPT |
.0006" |
| IPM |
27.5 |
| Metal Removal Rate |
0.137 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
