1/8" Diameter PH Stainless Stub (1.5XD-2XD): 3/8" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in 17-4PH and 15-5 PH (38-42 HRc) and Titanium (6AL4V):
1/8" Diameter x 1/4" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
1/8" Diameter x 3/8" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
| Axial DOC |
3/8" and Below |
| Radial DOC |
.015" |
| SFM |
300 |
| RPM |
9,168 |
| CLPT |
.0012" |
| IPM |
55 |
| Metal Removal Rate |
0.30 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
