5/8" Diameter PH Series Stainless Long (6XD-8XD): 2-1/2" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in 17-4PH and 15-5 PH (38-42 HRc):
5/8" Diameter x 2-1/2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
5/8" Diameter x 2-1/8" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
5/8" Diameter x 2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
5/8" Diameter x 1-5/8" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
| Axial DOC |
2-1/2" and Below |
| Radial DOC |
.035" |
| SFM |
300 |
| RPM |
1,834 |
| CLPT |
.0035" |
| IPM |
32 |
| Metal Removal Rate |
2.80 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
