5/8" Diameter Tool Steel Stub (1.5XD-2XD): 1-1/4" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in Tool Steels like A2, H13, P20 & S7 (36 HRc and Below):
5/8" Diameter x 3/4" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
5/8" Diameter x 1-1/4" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill
| Axial DOC |
1-1/4" and Below |
| Radial DOC |
.055" |
| SFM |
350 |
| RPM |
2,140 |
| CLPT |
.010" |
| IPM |
107 |
| Metal Removal Rate |
7.35 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
