Factory Stock
Hill Inventory: 0Kyocera GDMS4020N030PHPR1535 .157 Width KGD Cutoff Insert (Single Sided for Deep Cutoff). Inserts come 10 to a Pack, Please Order in Quantities of 10. .157 Width KGD Cutoff Insert (Single Sided for Deep Cutoff). Inserts come 10 to a Pack, Please Order in Quantities of 10
Kyocera VBMT 3305VF CCX Grade CVD Cermet, 5 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel and (K) Gray Cast Iron, (K) Nodular Cast Iron
Kyocera VBMT 3305VF CCX Grade CVD Cermet, 5 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel and (K) Gray Cast Iron, (K) Nodular Cast Iron
Kyocera DNMG 432PG CA515 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Medium-Roughing in (P) Carbon/Alloy Steel
Kyocera DNMG 432PG CA515 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Medium-Roughing in (P) Carbon/Alloy Steel
Kyocera VNMG 331PQ CA515 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (P) Carbon/Alloy Steel
Kyocera VNMG 331PQ CA515 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (P) Carbon/Alloy Steel
Kyocera DCMT 21505PP PR1725 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel and (P) Free-Cutting Steel, (M) Stainless Steel
Kyocera DCMT 21505PP PR1725 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel and (P) Free-Cutting Steel, (M) Stainless Steel
Kyocera VNMG 331PP CCX Grade CVD Cermet, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel and (K) Gray Cast Iron, (K) Nodular Cast Iron
Kyocera VNMG 331PP CCX Grade CVD Cermet, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel and (K) Gray Cast Iron, (K) Nodular Cast Iron
Kyocera DNMG 432PG CA025P Grade CVD Carbide, 55 Degree Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel
Kyocera DNMG 432PG CA025P Grade CVD Carbide, 55 Degree Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel
Kyocera PKM 30N025PM PR1535 Grade PVD Carbide, 0.1180" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PKM 30N025PM PR1535 Grade PVD Carbide, 0.1180" Cutting Width, Neutral Cut-Off Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
Kyocera PNMU 1205ANERSM PR1225 Grade PVD Carbide, Pentagon, Negative Rake Angle, Right-Hand Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Austenitic Stainless Steel. Milling Inserts for MFPN Face Mill. Inserts come 10 to a Pack, Please Order in Quantities of 10
Kyocera PNMU 1205ANERSM PR1225 Grade PVD Carbide, Pentagon, Negative Rake Angle, Right-Hand Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Austenitic Stainless Steel. Milling Inserts for MFPN Face Mill. Inserts come 10 to a Pack, Please Order in Quantities of 10
Kyocera EZBR 030030HP008H PR1225 Grade, Right-Hand, Micro Bar with a 3.00mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 030030HP008H PR1225 Grade, Right-Hand, Micro Bar with a 3.00mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera DA 0870MGM PR1535 Grade PVD Carbide, Replaceable Drill Tip with a 0.3425" (8.70mm) Cutting Diameter, General Purpose, Right-Hand Drilling Insert for (P) Steel and (M) Stainless Steel (DRA Magic Drill Series)
Kyocera DA 0870MGM PR1535 Grade PVD Carbide, Replaceable Drill Tip with a 0.3425" (8.70mm) Cutting Diameter, General Purpose, Right-Hand Drilling Insert for (P) Steel and (M) Stainless Steel (DRA Magic Drill Series)
Kyocera VBMT332HQPR1125 Inserts (Come 10 to a Pack, Order in Quantities of 10)
Kyocera VBMT332HQPR1125 Inserts (Come 10 to a Pack, Order in Quantities of 10)
Kyocera TNMG332PTCA6525* Inserts (Come 10 to a Pack, Order in Quantities of 10)
Kyocera TNMG332PTCA6525* Inserts (Come 10 to a Pack, Order in Quantities of 10)
Kyocera WCMX 06T308M1 PR1230 Grade PVD Carbide, Right-Hand Drilling Insert for (P) Carbon/Alloy Steel, (P) Tool Steel, (M) Stainless Steel, (S) Heat-Resistant Alloy (Holeshot Drill & Coremaster Coredrill)
Kyocera WCMX 06T308M1 PR1230 Grade PVD Carbide, Right-Hand Drilling Insert for (P) Carbon/Alloy Steel, (P) Tool Steel, (M) Stainless Steel, (S) Heat-Resistant Alloy (Holeshot Drill & Coremaster Coredrill)
Kyocera LOMU 100408ERSM PR1535 Grade PVD Carbide, Rectangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (M) Austenitic Stainless Steel, (S) Titanium Alloy and (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Martensitic Stainless Steel, (M) Precipitation Hardened Stainless Steel, (S) Heat-Resistant Alloy
Kyocera LOMU 100408ERSM PR1535 Grade PVD Carbide, Rectangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (M) Austenitic Stainless Steel, (S) Titanium Alloy and (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Martensitic Stainless Steel, (M) Precipitation Hardened Stainless Steel, (S) Heat-Resistant Alloy
Kyocera LOMU 100408ERGM PR1535 Grade PVD Carbide, Rectangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (M) Precipitation Hardened Stainless Steel and (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Austenitic Stainless Steel, (M) Martensitic Stainless Steel, (S) Heat-Resistant Alloy, (S) Titanium Alloy
Kyocera LOMU 100408ERGM PR1535 Grade PVD Carbide, Rectangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (M) Precipitation Hardened Stainless Steel and (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Austenitic Stainless Steel, (M) Martensitic Stainless Steel, (S) Heat-Resistant Alloy, (S) Titanium Alloy
Kyocera ZCMT 10T304 PR1225 Grade PVD Carbide, Right-Hand Drilling Insert for (M) Stainless Steel and (P) Carbon/Alloy Steel (DRZ Magic Drill)
Kyocera ZCMT 10T304 PR1225 Grade PVD Carbide, Right-Hand Drilling Insert for (M) Stainless Steel and (P) Carbon/Alloy Steel (DRZ Magic Drill)
Kyocera VBMT 331VF CCX Grade CVD Cermet, 5 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel and (K) Gray Cast Iron, (K) Nodular Cast Iron
Kyocera VBMT 331VF CCX Grade CVD Cermet, 5 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel and (K) Gray Cast Iron, (K) Nodular Cast Iron
Kyocera VBMT 3305VF PV720 Grade PVD Cermet, 5 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
Kyocera VBMT 3305VF PV720 Grade PVD Cermet, 5 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
Kyocera EZBR 025020ST008H PR1225 Grade, Right-Hand, Micro Bar with a 2.50mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 025020ST008H PR1225 Grade, Right-Hand, Micro Bar with a 2.50mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 020017ST008H PR1225 Grade, Right-Hand, Micro Bar with a 2.00mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 020017ST008H PR1225 Grade, Right-Hand, Micro Bar with a 2.00mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera CNMG 432XQ CA025P Grade CVD Carbide, 80 Degree Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Medium in (P) Carbon/Alloy Steel
Kyocera CNMG 432XQ CA025P Grade CVD Carbide, 80 Degree Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Medium in (P) Carbon/Alloy Steel
Kyocera CCMT 3252WP CA515 Grade CVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel
Kyocera CCMT 3252WP CA515 Grade CVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel
Kyocera CCMT 3251WP CA515 Grade CVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel
Kyocera CCMT 3251WP CA515 Grade CVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel
Kyocera VNMG 332 CA510 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Roughing in (P) Carbon/Alloy Steel. Inserts come 10 to a Pack, Please Order in Quantities of 10
Kyocera VNMG 332 CA510 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Roughing in (P) Carbon/Alloy Steel. Inserts come 10 to a Pack, Please Order in Quantities of 10
Kyocera XPMT 090208 TN100M Grade Uncoated Cermet, Parallelogram, Positive Rake Angle, Right-Hand Milling Insert for Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Stainless Steel, (K) Gray Cast Iron, (K) Nodular Cast Iron, (N) Non-Ferrous Metals
Kyocera XPMT 090208 TN100M Grade Uncoated Cermet, Parallelogram, Positive Rake Angle, Right-Hand Milling Insert for Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Stainless Steel, (K) Gray Cast Iron, (K) Nodular Cast Iron, (N) Non-Ferrous Metals
Kyocera XPMT 15T308 TN100M Grade Uncoated Cermet, Parallelogram, Positive Rake Angle, Right-Hand Milling Insert for Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Stainless Steel, (K) Gray Cast Iron, (K) Nodular Cast Iron, (N) Non-Ferrous Metals
Kyocera XPMT 15T308 TN100M Grade Uncoated Cermet, Parallelogram, Positive Rake Angle, Right-Hand Milling Insert for Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Stainless Steel, (K) Gray Cast Iron, (K) Nodular Cast Iron, (N) Non-Ferrous Metals
Kyocera VNMG 332 CA5505 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Roughing in (P) Carbon/Alloy Steel and (K) Gray Cast Iron, (K) Nodular Cast Iron. Negative Turning Inserts with .031 Radius. Inserts come 10 to a Pack, Please Order in Quantities of 10
Kyocera VNMG 332 CA5505 Grade CVD Carbide, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Roughing in (P) Carbon/Alloy Steel and (K) Gray Cast Iron, (K) Nodular Cast Iron. Negative Turning Inserts with .031 Radius. Inserts come 10 to a Pack, Please Order in Quantities of 10
Kyocera LOMU 100408ERGM PR1525 Grade PVD Carbide, Rectangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel and (M) Austenitic Stainless Steel
Kyocera LOMU 100408ERGM PR1525 Grade PVD Carbide, Rectangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel and (M) Austenitic Stainless Steel
Kyocera WNMU 080608ENGM PR1535 Grade PVD Carbide, Trigon, Negative Rake Angle, Neutral Milling Insert for Roughing in (M) Austenitic Stainless Steel, (M) Precipitation Hardened Stainless Steel, (S) Titanium Alloy and (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (M) Martensitic Stainless Steel, (S) Heat-Resistant Alloy
Kyocera WNMU 080608ENGM PR1535 Grade PVD Carbide, Trigon, Negative Rake Angle, Neutral Milling Insert for Roughing in (M) Austenitic Stainless Steel, (M) Precipitation Hardened Stainless Steel, (S) Titanium Alloy and (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (M) Martensitic Stainless Steel, (S) Heat-Resistant Alloy
Kyocera ZCMT 12T306 PR1230 Grade PVD Carbide, Right-Hand Drilling Insert for (P) Carbon/Alloy Steel, (P) Tool Steel and (M) Stainless Steel (DRZ Magic Drill)
Kyocera ZCMT 12T306 PR1230 Grade PVD Carbide, Right-Hand Drilling Insert for (P) Carbon/Alloy Steel, (P) Tool Steel and (M) Stainless Steel (DRZ Magic Drill)
Kyocera PNMU 1205ANERGM PR1525 Grade PVD Carbide, Pentagon, Negative Rake Angle, Right-Hand Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Austenitic Stainless Steel
Kyocera PNMU 1205ANERGM PR1525 Grade PVD Carbide, Pentagon, Negative Rake Angle, Right-Hand Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Austenitic Stainless Steel
Kyocera PNMU 1205ANERGM PR1535 Grade PVD Carbide, Pentagon, Negative Rake Angle, Right-Hand Milling Insert for Roughing in (M) Precipitation Hardened Stainless Steel and (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Austenitic Stainless Steel, (M) Martensitic Stainless Steel, (S) Heat-Resistant Alloy
Kyocera PNMU 1205ANERGM PR1535 Grade PVD Carbide, Pentagon, Negative Rake Angle, Right-Hand Milling Insert for Roughing in (M) Precipitation Hardened Stainless Steel and (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Austenitic Stainless Steel, (M) Martensitic Stainless Steel, (S) Heat-Resistant Alloy
Kyocera TKF16L200TPR1425* Inserts (Come 10 to a Pack, Order in Quantities of 10)
Kyocera TKF16L200TPR1425* Inserts (Come 10 to a Pack, Order in Quantities of 10)
Kyocera KPKB32-3, Neutral, Cut-Off Blade with a 100.00mm Maximum Cut-Off Diameter for Cut-Off Applications
Kyocera KPKB32-3, Neutral, Cut-Off Blade with a 100.00mm Maximum Cut-Off Diameter for Cut-Off Applications
Kyocera SF0625DRA130M15, DRA Magic Drill 0.5118-0.5311" Cutting Diameter, 0.6250" Diameter Flange Shank, Coolant-Through Replaceable Tip Drill
Kyocera SF0625DRA130M15, DRA Magic Drill 0.5118-0.5311" Cutting Diameter, 0.6250" Diameter Flange Shank, Coolant-Through Replaceable Tip Drill
Kyocera SPW7050 M7X0.75 Screw for MFPN45, MFWN Face Mills
Kyocera SPW7050 M7X0.75 Screw for MFPN45, MFWN Face Mills
Kyocera SB50140TR M5X0.8 Screw for MFPN45, MFWN Face Mills, End Mills
Kyocera SB50140TR M5X0.8 Screw for MFPN45, MFWN Face Mills, End Mills
Kyocera EZBR 035030ST015H PR1225 Grade, Right-Hand, Micro Bar with a 3.50mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 035030ST015H PR1225 Grade, Right-Hand, Micro Bar with a 3.50mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 075070ST015F PR1725 Grade, Right-Hand, Micro Bar with a 7.50mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 075070ST015F PR1725 Grade, Right-Hand, Micro Bar with a 7.50mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 050050HP015H PR1225 Grade, Right-Hand, Micro Bar with a 5.00mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 050050HP015H PR1225 Grade, Right-Hand, Micro Bar with a 5.00mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 070070HP015H PR1725 Grade, Right-Hand, Micro Bar with a 7.00mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera EZBR 070070HP015H PR1725 Grade, Right-Hand, Micro Bar with a 7.00mm Minimum Bore Diameter for (P) Steel Boring Applications
Kyocera DNMX 431WF PV720 Grade PVD Cermet, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
Kyocera DNMX 431WF PV720 Grade PVD Cermet, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
Kyocera DNMX 432WF PV710 Grade PVD Cermet, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel
Kyocera DNMX 432WF PV710 Grade PVD Cermet, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel
Kyocera DCMT 2151PP PR1725 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel and (P) Free-Cutting Steel, (M) Stainless Steel
Kyocera DCMT 2151PP PR1725 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel and (P) Free-Cutting Steel, (M) Stainless Steel
Kyocera DA 1000MGM PR1535 Grade PVD Carbide, Replaceable Drill Tip with a 0.3937" (10.00mm) Cutting Diameter, General Purpose, Right-Hand Drilling Insert for (P) Steel and (M) Stainless Steel (DRA Magic Drill Series)
Kyocera DA 1000MGM PR1535 Grade PVD Carbide, Replaceable Drill Tip with a 0.3937" (10.00mm) Cutting Diameter, General Purpose, Right-Hand Drilling Insert for (P) Steel and (M) Stainless Steel (DRA Magic Drill Series)
Kyocera DA 1300MGM PR1535 Grade PVD Carbide, Replaceable Drill Tip with a 0.5118" (13.00mm) Cutting Diameter, General Purpose, Right-Hand Drilling Insert for (P) Steel and (M) Stainless Steel (DRA Magic Drill Series)
Kyocera DA 1300MGM PR1535 Grade PVD Carbide, Replaceable Drill Tip with a 0.5118" (13.00mm) Cutting Diameter, General Purpose, Right-Hand Drilling Insert for (P) Steel and (M) Stainless Steel (DRA Magic Drill Series)
Kyocera DA 2150MGM PR1535 Grade PVD Carbide, Replaceable Drill Tip with a 0.8465" (21.50mm) Cutting Diameter, General Purpose, Right-Hand Drilling Insert for (P) Steel and (M) Stainless Steel (DRA Magic Drill Series)
Kyocera DA 2150MGM PR1535 Grade PVD Carbide, Replaceable Drill Tip with a 0.8465" (21.50mm) Cutting Diameter, General Purpose, Right-Hand Drilling Insert for (P) Steel and (M) Stainless Steel (DRA Magic Drill Series)
Kyocera CCGT 21505MFPSK PR1535 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (S) Heat-Resistant Alloy, (S) Titanium Alloy, (M) Stainless Steel
Kyocera CCGT 21505MFPSK PR1535 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (S) Heat-Resistant Alloy, (S) Titanium Alloy, (M) Stainless Steel
Kyocera CCGT 215013MFLU PR1225 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Left-Hand Turning Insert for Light Interruption and Finishing in (M) Stainless Steel and (P) Carbon/Alloy Steel
Kyocera CCGT 215013MFLU PR1225 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Left-Hand Turning Insert for Light Interruption and Finishing in (M) Stainless Steel and (P) Carbon/Alloy Steel